The project consists of providing the DOTr/LTO, and/or Private Proponents with a Mobile Vehicle Inspection Facility (MVIF) for Heavy-Duty Vehicle testing which is truck-mounted and can be deployed anywhere in the country to conduct automated vehicle and is complete with support components for visual inspection, data storage and data transmittal to LTO main data centre.

The testing equipment inclusive in the proposal for the MVIF for HDV are the following:

Roller brake Tester
Speedometer Tester
Side Slip Tester
Headlight Tester
Emission Opacimeter

2. High-Level Requirements

The MVIF must include the following:

Ability to allow both MVIF operator and LTO / DOTr to access the applications thru proprietary Apps and/or monitor the facility thru a website via video streaming of actual inspection and testing via plate number search in operator website.
The ability for clients to book/cancel an appointment and pay online.
Ability to interface data with the existing LTO / DOTr main data center and;
Ability to incorporate into the inspection process almost 100% no human intervention operation to ensure tamper-proof data collection, transmittal, and storage.

3. Deliverable

Cartesy Diagnosis Technology will tailor-fit the inspection process and solutions to almost 100% no-human intervention and inspection accuracy and to disallow any IT weaknesses that will allow the facility operators and other external interested entities to tamper the process and programs allowing tampering of results to the detriment of the facility to affect data integrity as required by the authorities.

4. Specific Exclusions from Scope

Motorcycle Inspection Facility- a separate mobile motorcycle test lane is available.

5. Implementation Plan

Upon acceptance of our proposal, we expect within 30 days to deploy at least 5 units of MVIF ramping up to 10 units every 15 days thereafter. Meaning, we can deliver and operationalize 15 MVIF in 45 days upon acceptance of our proposal and another 10 units every 15 days until all orders are delivered.

6. High-Level Timeline/Schedule

The project is expected to be completed within 6 months upon approval of our proposal.

Sideslip tester:

Item	Unit	Parameters
Max. axle load	Kg	10000
Plate dimension	mm	-10—+10
Plate force (moving 0.1mm)	N	≤50
Plate force (moving 3mm)	N	≤80
Test scope	m/km	-15—+15
Indication error	m/km	±0.2
Power	V	DC12V

Roller brake tester

Item	Parameters
Max. axle load	10000kg
Brake force test scope	0-45000N×2
Measurement accuracy	±(0.075%FS或5%)
Roller diameter	160mm
Roller length	1020mm
Roller center distance	380mm
Rotating speed	51r/min
Voltage	380V
Power	5KW

Speedometer

Item	Parameters
Max. axle load	10000kg
Test scope	0-100km/h
Measurement accuracy	±(2%+1km/h)
Lifting method	Double airbag
Airbag working pressure	0.6-0.8MPa
Roller diameter	Φ190mm
Roller length	1000mm
Roller center distance	430mm

Axle load tester

Item	Parameter
Max. axle load	10000kg
Graduation value	2kg
Indication error	±(0.2%Fs或2%)
Sensor supply voltage	12V

Headlight tester

Item	Parameter
Test scope	0-60000cd
Optical axis offset	上 1º30´ ~ 下 2º30´ 左 2º30´ ~ 右 2º30´
Indication error	±10%
Optical axis offset	±15´,±15´

Maintenance and servicing:

1. After the product is used for three months, please disassemble the platform panel and add calcium-base lubrication grease to the guide seat with a pressure rod type oil gun to lubricate the guide sleeve and guide pillar. And also check if the fastening bolts of guide seat and oil cylinder etc. components are loose.
2. Please check the oil level in the oil tank of hydraulic station. Add N46 engine oil (old standard is 30# engine oil) if the oil volume is insufficient.
3. In case the oil pipe of hydraulic system is broken and the oil sprays outside, please stop the operation immediately and carry out maintenance. Do not block the broken place with hands. Otherwise the high pressure oil may injure persons.

FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in wooden case per set

Q2. What is your terms of payment?
A: T/T 50% as deposit, and 50% before delivery. We'll show you the photos of the products and packages
before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB

Q4. How about your delivery time?
A: Generally, it will take 10 or 30 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.

Inquiry Cart 0